Should I get a 15 or 16 gauge finish nailer?

The main advantage of a 16-gauge gun is that it’s smaller and lighter. If you’re shopping for a finish nailer, I’d recommend the larger 15-gauge gun, simply because the fatter nails provide more holding power. … You’ll pay about the same for a name-brand 16-gauge nailer as you would for a 15-gauge gun.

What gauge nail is best for finish work?

Finish nailers use 15-gauge or 16-gauge nails. Nailers that use 16-gauge nails are a little lighter and smaller than the larger 15-gauge variety. That said, the large 15-gauge nails will hold better than 16-gauge nails. Most finish nailers can handle nail sizes between 1.25-inch and 2.25-inch.

When would you use a 16 gauge finish nailer?

The 16-Gauge Nailer is Versatile

Carpenters use them for a wide variety of tasks including interior trim, baseboard, and crown. You can do stair risers with them, and they’re a good option to nail down tongue and groove flooring like near a wall or in a closet where a flooring nailer won’t work.

IT IS IMPORTANT:  Best answer: Can you hunt coyote with a 20 gauge shotgun?

When would you use a 15 gauge nailer?

Let’s start with 15 gauge finish nailers. These tools are ideal for projects such as cabinet and furniture building, picture frame assembly, trim and molding installation, and upholstery trim applications. Look for an angled nail magazine on most 15 gauge finish nailers.

Can you use 15 gauge nails for baseboards?

What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.

Can you use 16 gauge nails for framing?

Now, for the most part, 16 gauge nails, typically 3 1/2 inches long are the best to use when it comes to framing projects. These are technically called 16-d (or “16-penny”) nails and you often have two choices when framing: common nails and sinkers (forget the rest!).

What gauge nail gun should I buy?

16-gauge nails are the most versatile size, so a 16-gauge nail gun is a great option if you need it for many different projects. 15-gauge nails are most often used for installing thick trim. 18-gauge and higher-gauge nail guns are best used for fine detail work, furniture repair and thin trim work.

What is the most versatile finish nailer?

The real anchors of the pneumatic-trim-nailer team are 15- and 16-gauge nailers. These two tools fire nails up to 2-1/2 inches long, and are the most versatile for interior carpentry.

Which is better brad nail or finish nailer?

Finish nails are stronger than brads, so choose them if your project needs to be durable. Brads are thin, 18-gauge nails made for more delicate woodworking jobs. They’re available in collated strips for nail guns or individual pieces.

IT IS IMPORTANT:  Question: How accurate is a Kentucky long rifle?

What size nails should I use for quarter round?

Attaching Quarter Round

Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well.

What type of nail gun do I need for baseboards?

A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.

What size nail do I use for shiplap?

We recommend using 16- or 18-gauge finish or brad nails. 1-½” to 2” in length should be sufficient. Both gauges are strong enough to hold the lumber securely, but small enough as to not leave a large hole on the face of the board.

What size nails should I use for framing?

Nail size is more important than you might think when framing interior walls. Nails that are too long or fat are difficult to drive and can split wood, while short or thin nails just don’t do the job. The best nails for framing are 3 1/2 inches long. These are called 16-d, or “16-penny,” nails.